cisco.nxos.nxos_vrf_af – Manages VRF AF.

Note

This plugin is part of the cisco.nxos collection (version 2.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_vrf_af.

New in version 1.0.0: of cisco.nxos

Synopsis

  • Manages VRF AF

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
afi
string / required
    Choices:
  • ipv4
  • ipv6
Address-Family Identifier (AFI).
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.
This option will be removed in a release after 2022-06-01.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
string
    Choices:
  • cli
  • nxapi
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
    Choices:
  • no
  • yes
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no
  • yes
Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
route_target_both_auto_evpn
boolean
    Choices:
  • no
  • yes
Enable/Disable the EVPN route-target 'auto' setting for both import and export target communities.
route_targets
list / elements=dictionary
Specify the route-targets which should be imported and/or exported under the AF. This argument accepts a list of dicts that specify the route-target, the direction (import|export|both) and state of each route-target. Default direction is direction=both. See examples.
direction
string
    Choices:
  • import
  • export
  • both
Indicates the direction of the route-target (import|export|both)
rt
string / required
Defines the route-target itself
state
string
    Choices:
  • present
  • absent
Determines whether the route-target with the given direction should be present or not on the device.
state
string
    Choices:
  • present
  • absent
Determines whether the config should be present or not on the device.
vrf
string / required
Name of the VRF.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • Unsupported for Cisco MDS
  • Default, where supported, restores params default value.
  • In case of state=absent the address-family configuration will be absent. Therefore the options route_target_both_auto_evpn and route_targets are ignored.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- cisco.nxos.nxos_vrf_af:
    vrf: ntc
    afi: ipv4
    route_target_both_auto_evpn: true
    state: present

- cisco.nxos.nxos_vrf_af:
    vrf: ntc
    afi: ipv4
    route_targets:
    - rt: 65000:1000
      direction: import
    - rt: 65001:1000
      direction: import

- cisco.nxos.nxos_vrf_af:
    vrf: ntc
    afi: ipv4
    route_targets:
    - rt: 65000:1000
      direction: import
    - rt: 65001:1000
      state: absent

- cisco.nxos.nxos_vrf_af:
    vrf: ntc
    afi: ipv4
    route_targets:
    - rt: 65000:1000
      direction: export
    - rt: 65001:1000
      direction: export

- cisco.nxos.nxos_vrf_af:
    vrf: ntc
    afi: ipv4
    route_targets:
    - rt: 65000:1000
      direction: export
      state: absent

- cisco.nxos.nxos_vrf_af:
    vrf: ntc
    afi: ipv4
    route_targets:
    - rt: 65000:1000
      direction: both
      state: present
    - rt: 65001:1000
      direction: import
      state: present
    - rt: 65002:1000
      direction: both
      state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always
commands sent to the device

Sample:
['vrf context ntc', 'address-family ipv4 unicast']


Authors

  • Gabriele Gerbino (@GGabriele)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_vrf_af_module.html