netapp.ontap.na_ontap_wait_for_condition – NetApp ONTAP wait_for_condition. Loop over a get status request until a condition is met.

Note

This plugin is part of the netapp.ontap collection (version 21.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_wait_for_condition.

New in version 20.8.0: of netapp.ontap

Synopsis

  • Loop over an ONTAP get status request until a condition is satisfied.
  • Report a timeout error if timeout is exceeded while waiting for the condition.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
attributes
dictionary
a dictionary of custom attributes for the event.
for instance, sp_upgrade, sp_version require node.
sp_version requires expectd_version.
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
conditions
list / elements=string / required
one or more conditions to match
for instance is_in_progress for sp_upgrade, firmware_version for sp_version.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
name
string / required
    Choices:
  • sp_upgrade
  • sp_version
The name of the event to check for.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
polling_interval
integer
Default:
5
how ofen to check for the conditions, in seconds.
state
string
    Choices:
  • present
  • absent
whether the conditions should be present or absent.
if present, the module exits when any of the conditions is observed.
if absent, the module exits with success when None of the conditions is observed.
timeout
integer
Default:
180
how long to wait for the conditions, in seconds.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: wait for sp_upgrade in progress
  na_ontap_wait_for_condition:
    hostname: "{{ ontap_admin_ip }}"
    username: "{{ ontap_admin_username }}"
    password: "{{ ontap_admin_password }}"
    https: true
    validate_certs: no
    name: sp_upgrade
    conditions: is_in_progress
    attributes:
      node: "{{ node }}"
    polling_interval: 30
    timeout: 1800

- name: wait for sp_upgrade not in progress
  na_ontap_wait_for_condition:
    hostname: "{{ ontap_admin_ip }}"
    username: "{{ ontap_admin_username }}"
    password: "{{ ontap_admin_password }}"
    https: true
    validate_certs: no
    name: sp_upgrade
    conditions: is_in_progress
    state: absent
    attributes:
      node: "{{ ontap_admin_ip }}"
    polling_interval: 30
    timeout: 1800

- name: wait for sp_version to match 3.9
  na_ontap_wait_for_condition:
    hostname: "{{ ontap_admin_ip }}"
    username: "{{ ontap_admin_username }}"
    password: "{{ ontap_admin_password }}"
    https: true
    validate_certs: no
    name: sp_version
    conditions: firmware_version
    state: present
    attributes:
      node: "{{ ontap_admin_ip }}"
      expected_version: 3.9
    polling_interval: 30
    timeout: 1800

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
last_state
string
always
last observed state for event

states
string
always
summarized list of observed states while waiting for completion
reported for success or timeout error



Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/netapp/ontap/na_ontap_wait_for_condition_module.html