junipernetworks.junos.junos_lldp_interfaces – LLDP interfaces resource module

Note

This plugin is part of the junipernetworks.junos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_lldp_interfaces.

New in version 1.0.0: of junipernetworks.junos

Synopsis

  • This module manages link layer discovery protocol (LLDP) attributes of interfaces on Juniper JUNOS devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
The list of link layer discovery protocol interface attribute configurations
enabled
boolean
    Choices:
  • no
  • yes
This is a boolean value to control disabling of LLDP on the interface name
name
string / required
Name of the interface LLDP needs to be configured on.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the Junos device by executing the command show protocols lldp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state of the configuration after module completion.

Examples

# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;

- name: Merge provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
    - name: ge-0/0/1
    - name: ge-0/0/2
      enabled: false
    state: merged

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

- name: Replace provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
    - name: ge-0/0/2
      disable: false
    - name: ge-0/0/3
      enabled: false
    state: replaced

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2;
# interface ge-0/0/3 {
#     disable;
# }

# Using overridden
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

- name: Override provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
    - name: ge-0/0/2
      enabled: false
    state: overridden

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/2 {
#     disable;
# }

# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2;
# interface ge-0/0/3 {
#     disable;
# }
- name: Delete lldp interface configuration (this will not delete other lldp configuration)
  junipernetworks.junos.junos_lldp_interfaces:
    config:
    - name: ge-0/0/1
    - name: ge-0/0/3
    state: deleted

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/2;
# interface ge-0/0/1;
# Using gathered
# Before state:
# ------------
#
#ansible@cm123456tr21# show protocols lldp
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
- name: Gather junos lldp interfaces as in given arguments
  junipernetworks.junos.junos_lldp_interfaces:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "name": "ge-0/0/1"
#         },
#         {
#             "enabled": false,
#             "name": "ge-0/0/2"
#         }
#     ]
# After state:
# ------------
#
#ansible@cm123456tr21# show protocols lldp
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
        enabled: false
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:protocols
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:lldp>
#         <nc:interface>
#             <nc:name>ge-0/0/1</nc:name>
#             <nc:disable delete="delete"/>
#         </nc:interface>
#         <nc:interface>
#             <nc:name>ge-0/0/2</nc:name>
#             <nc:disable/>
#         </nc:interface>
#     </nc:lldp>
# </nc:protocols>"
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <protocols>
#             <ospf>
#                 <area>
#                     <name>0.0.0.0</name>
#                     <interface>
#                         <name>ge-0/0/0.0</name>
#                     </interface>
#                 </area>
#             </ospf>
#             <lldp>
#                 <interface>
#                     <name>ge-0/0/1</name>
#                 </interface>
#                 <interface>
#                     <name>ge-0/0/2</name>
#                     <disable/>
#                 </interface>
#             </lldp>
#         </protocols>
#     </configuration>
# </rpc-reply>
# - name: Convert lldp interfaces config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lldp_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "name": "ge-0/0/1"
#         },
#         {
#             "enabled": false,
#             "name": "ge-0/0/2"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:lldp> <nc:interface> <nc:name>ge-0/0/1</nc:name> <nc:disable delete="delete"/> </nc:interface> <nc:interface> <nc:name>ge-0/0/2</nc:name> <nc:disable/> </nc:interface> </nc:lldp> </nc:protocols>', 'xml 2', 'xml 3']


Authors

  • Ganesh Nalawade (@ganeshrn)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_lldp_interfaces_module.html