cisco.ios.ios_ntp_global – ntp_global resource module

Note

This plugin is part of the cisco.ios collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ntp_global.

New in version 2.5.0: of cisco.ios

Synopsis

  • This module provides declarative management of ntp on Cisco IOS devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
dictionary
A dictionary of ntp options
access_group
dictionary
Control NTP access
peer
list / elements=dictionary
Provide full access
access_list
string
name or number of access list
ipv4
boolean
    Choices:
  • no
  • yes
ipv4 access lists (Default not idempotent)
ipv6
boolean
    Choices:
  • no
  • yes
ipv6 access lists (Default not idempotent)
kod
boolean
    Choices:
  • no
  • yes
Send a Kiss-o-Death packet for failing peers
query_only
list / elements=dictionary
Allow only control queries
access_list
string
name or number of access list
ipv4
boolean
    Choices:
  • no
  • yes
ipv4 access lists (Default not idempotent)
ipv6
boolean
    Choices:
  • no
  • yes
ipv6 access lists (Default not idempotent)
kod
boolean
    Choices:
  • no
  • yes
Send a Kiss-o-Death packet for failing peers
serve
list / elements=dictionary
Provide server and query access
access_list
string
name or number of access list
ipv4
boolean
    Choices:
  • no
  • yes
ipv4 access lists (Default not idempotent)
ipv6
boolean
    Choices:
  • no
  • yes
ipv6 access lists (Default not idempotent)
kod
boolean
    Choices:
  • no
  • yes
Send a Kiss-o-Death packet for failing peers
serve_only
list / elements=dictionary
Provide only server access
access_list
string
name or number of access list
ipv4
boolean
    Choices:
  • no
  • yes
ipv4 access lists (Default not idempotent)
ipv6
boolean
    Choices:
  • no
  • yes
ipv6 access lists (Default not idempotent)
kod
boolean
    Choices:
  • no
  • yes
Send a Kiss-o-Death packet for failing peers
allow
dictionary
Allow processing of packets
control
dictionary
Allow processing control mode packets
rate_limit
integer
Rate-limit delay.
private
boolean
    Choices:
  • no
  • yes
Allow processing private mode packets
authenticate
boolean
    Choices:
  • no
  • yes
Authenticate time sources
authentication_keys
list / elements=dictionary
Authentication key for trusted time sources
algorithm
string
Authentication type
encryption
integer
Authentication key encryption type
id
integer
Key number
key
string
Password
broadcast_delay
integer
Estimated round-trip delay
clock_period
integer
Length of hardware clock tick, clock period in 2^-32 seconds
logging
boolean
    Choices:
  • no
  • yes
Enable NTP message logging
master
dictionary
Act as NTP master clock
enabled
boolean
    Choices:
  • no
  • yes
Enable master clock
stratum
integer
Stratum number
max_associations
integer
Set maximum number of associations
max_distance
integer
Maximum Distance for synchronization
min_distance
integer
Minimum distance to consider for clockhop
orphan
integer
Threshold Stratum for orphan mode
panic_update
boolean
    Choices:
  • no
  • yes
Reject time updates > panic threshold (default 1000Sec)
passive
boolean
    Choices:
  • no
  • yes
NTP passive mode
peers
list / elements=dictionary
Configure NTP peer
burst
boolean
    Choices:
  • no
  • yes
Send a burst when peer is reachable (Default)
iburst
boolean
    Choices:
  • no
  • yes
Send a burst when peer is unreachable (Default)
key
integer
Configure peer authentication key
maxpoll
integer
Maximum poll interval Poll value in Log2
minpoll
integer
Minimum poll interval Poll value in Log2
normal_sync
boolean
    Choices:
  • no
  • yes
Disable rapid sync at startup
peer
string
ipv4/ipv6 address or hostname of the peer
prefer
boolean
    Choices:
  • no
  • yes
Prefer this peer when possible
source
string
Interface for source address
use_ipv4
boolean
    Choices:
  • no
  • yes
Use IP for DNS resolution
use_ipv6
boolean
    Choices:
  • no
  • yes
Use IPv6 for DNS resolution
version
integer
Configure NTP version
vrf
string
VPN Routing/Forwarding Information
servers
list / elements=dictionary
Configure NTP server
burst
boolean
    Choices:
  • no
  • yes
Send a burst when peer is reachable (Default)
iburst
boolean
    Choices:
  • no
  • yes
Send a burst when peer is unreachable (Default)
key
integer
Configure peer authentication key
maxpoll
integer
Maximum poll interval Poll value in Log2
minpoll
integer
Minimum poll interval Poll value in Log2
normal_sync
boolean
    Choices:
  • no
  • yes
Disable rapid sync at startup
prefer
boolean
    Choices:
  • no
  • yes
Prefer this peer when possible
server
string
ipv4/ipv6 address or hostname of the server
source
string
Interface for source address
use_ipv4
boolean
    Choices:
  • no
  • yes
Use IP for DNS resolution
use_ipv6
boolean
    Choices:
  • no
  • yes
Use IPv6 for DNS resolution
version
integer
Configure NTP version
vrf
string
VPN Routing/Forwarding Information
source
string
Configure interface for source address
trusted_keys
list / elements=dictionary
Key numbers for trusted time sources
range_end
integer
End key number
range_start
integer
Start / key number
update_calendar
boolean
    Choices:
  • no
  • yes
Periodically update calendar with NTP time
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS device by executing the command show running-config | section ^ntp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • rendered
  • gathered
  • parsed
The state the configuration should be left in
The states rendered, gathered and parsed does not perform any change on the device.
The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.
The states replaced and overridden have identical behaviour for this module.
The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.
The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | section ^ntp executed on device. For state parsed active connection to remote host is not required.

Notes

Note

  • Tested against Cisco IOSv Version 15.6.
  • This module works with connection network_cli.

Examples

# Using state: merged

# Before state:
# -------------

# router-ios#show running-config | section ^ntp
# --------------------- EMPTY -----------------

# Merged play:
# ------------

- name: Apply the provided configuration
  cisco.ios.ios_ntp_global:
    config:
      access_group:
        peer:
          - access_list: DHCP-Server
            ipv4: true
            kod: true
          - access_list: preauth_ipv6_acl
            ipv6: true
            kod: true
          - access_list: '2'
            kod: true
        query_only:
          - access_list: '10'
      allow:
        control:
          rate_limit: 4
        private: true
      authenticate: true
      authentication_keys:
        - algorithm: md5
          encryption: 22
          id: 2
          key: SomeSecurePassword
      broadcast_delay: 22
      clock_period: 5
      logging: true
      master:
        stratum: 4
      max_associations: 34
      max_distance: 3
      min_distance: 10
      orphan: 4
      panic_update: true
      peers:
        - peer: 172.16.1.10
          version: 2
        - key: 2
          minpoll: 5
          peer: 172.16.1.11
          prefer: true
          version: 2
        - peer: checkPeerDomainIpv4.com
          prefer: true
          use_ipv4: true
        - peer: checkPeerDomainIpv6.com
          use_ipv6: true
        - peer: testPeerDomainIpv6.com
          prefer: true
          use_ipv6: true
      servers:
        - server: 172.16.1.12
          version: 2
        - server: checkServerDomainIpv6.com
          use_ipv6: true
        - server: 172.16.1.13
          source: GigabitEthernet0/1
      source: GigabitEthernet0/1
      trusted_keys:
        - range_end: 3
          range_start: 3
        - range_start: 21
    state: merged

# Commands Fired:
# ---------------

# "commands": [
#     "ntp allow mode control 4",
#     "ntp allow mode private",
#     "ntp authenticate",
#     "ntp broadcastdelay 22",
#     "ntp clock-period 5",
#     "ntp logging",
#     "ntp master 4",
#     "ntp max-associations 34",
#     "ntp maxdistance 3",
#     "ntp mindistance 10",
#     "ntp orphan 4",
#     "ntp panic update",
#     "ntp source GigabitEthernet0/1",
#     "ntp access-group ipv4 peer DHCP-Server kod",
#     "ntp access-group ipv6 peer preauth_ipv6_acl kod",
#     "ntp access-group peer 2 kod",
#     "ntp access-group query-only 10",
#     "ntp authentication-key 2 md5 SomeSecurePassword 22",
#     "ntp peer 172.16.1.10 version 2",
#     "ntp peer 172.16.1.11 key 2 minpoll 5 prefer  version 2",
#     "ntp peer ip checkPeerDomainIpv4.com prefer",
#     "ntp peer ipv6 checkPeerDomainIpv6.com",
#     "ntp peer ipv6 testPeerDomainIpv6.com prefer",
#     "ntp server 172.16.1.12 version 2",
#     "ntp server ipv6 checkServerDomainIpv6.com",
#     "ntp server 172.16.1.13 source GigabitEthernet0/1",
#     "ntp trusted-key 3 - 3",
#     "ntp trusted-key 21"
# ],


# After state:
# ------------

# router-ios#show running-config | section ^ntp
# ntp max-associations 34
# ntp logging
# ntp allow mode control 4
# ntp panic update
# ntp authentication-key 2 md5 0635002C497D0C1A1005173B0D17393C2B3A37 7
# ntp authenticate
# ntp trusted-key 3 - 3
# ntp trusted-key 21
# ntp orphan 4
# ntp mindistance 10
# ntp maxdistance 3
# ntp broadcastdelay 22
# ntp source GigabitEthernet0/1
# ntp access-group peer 2 kod
# ntp access-group ipv6 peer preauth_ipv6_acl kod
# ntp master 4
# ntp peer 172.16.1.10 version 2
# ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2
# ntp server 172.16.1.12 version 2
# ntp server 172.16.1.13 source GigabitEthernet0/1
# ntp peer ip checkPeerDomainIpv4.com prefer
# ntp peer ipv6 checkPeerDomainIpv6.com
# ntp peer ipv6 testPeerDomainIpv6.com prefer
# ntp server ipv6 checkServerDomainIpv6.com

# Using state: deleted

# Before state:
# -------------

# router-ios#show running-config | section ^ntp
# ntp max-associations 34
# ntp logging
# ntp allow mode control 4
# ntp panic update
# ntp authentication-key 2 md5 0635002C497D0C1A1005173B0D17393C2B3A37 7
# ntp authenticate
# ntp trusted-key 3 - 3
# ntp trusted-key 21
# ntp orphan 4
# ntp mindistance 10
# ntp maxdistance 3
# ntp broadcastdelay 22
# ntp source GigabitEthernet0/1
# ntp access-group peer 2 kod
# ntp access-group ipv6 peer preauth_ipv6_acl kod
# ntp master 4
# ntp peer 172.16.1.10 version 2
# ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2
# ntp server 172.16.1.12 version 2
# ntp server 172.16.1.13 source GigabitEthernet0/1
# ntp peer ip checkPeerDomainIpv4.com prefer
# ntp peer ipv6 checkPeerDomainIpv6.com
# ntp peer ipv6 testPeerDomainIpv6.com prefer
# ntp server ipv6 checkServerDomainIpv6.com

# Deleted play:
# -------------

- name: Remove all existing configuration
  cisco.ios.ios_ntp_global:
    state: deleted

# Commands Fired:
# ---------------

# "commands": [
#     "no ntp allow mode control 4",
#     "no ntp authenticate",
#     "no ntp broadcastdelay 22",
#     "no ntp logging",
#     "no ntp master 4",
#     "no ntp max-associations 34",
#     "no ntp maxdistance 3",
#     "no ntp mindistance 10",
#     "no ntp orphan 4",
#     "no ntp panic update",
#     "no ntp source GigabitEthernet0/1",
#     "no ntp access-group peer 2 kod",
#     "no ntp access-group ipv6 peer preauth_ipv6_acl kod",
#     "no ntp authentication-key 2 md5 0635002C497D0C1A1005173B0D17393C2B3A37 7",
#     "no ntp peer 172.16.1.10 version 2",
#     "no ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2",
#     "no ntp peer ip checkPeerDomainIpv4.com prefer",
#     "no ntp peer ipv6 checkPeerDomainIpv6.com",
#     "no ntp peer ipv6 testPeerDomainIpv6.com prefer",
#     "no ntp server 172.16.1.12 version 2",
#     "no ntp server 172.16.1.13 source GigabitEthernet0/1",
#     "no ntp server ipv6 checkServerDomainIpv6.com",
#     "no ntp trusted-key 21",
#     "no ntp trusted-key 3 - 3"
# ],

# After state:
# ------------

# router-ios#show running-config | section ^ntp
# --------------------- EMPTY -----------------

# Using state: overridden

# Before state:
# -------------

# router-ios#show running-config | section ^ntp
# ntp panic update
# ntp authentication-key 2 md5 00371C0B01680E051A33497E080A16001D1908 7
# ntp authenticate
# ntp trusted-key 3 - 4
# ntp trusted-key 21
# ntp source GigabitEthernet0/1
# ntp peer 172.16.1.10 version 2
# ntp server 172.16.1.12 version 2
# ntp peer ip checkPeerDomainIpv4.com prefer
# ntp server ipv6 checkServerDomainIpv6.com

# Overridden play:
# ----------------

- name: Override commands with provided configuration
  cisco.ios.ios_ntp_global:
    config:
      peers:
        - peer: ipv6DomainNew.com
          use_ipv6: true
        - peer: 172.16.1.100
          prefer: true
          use_ipv4: true
      access_group:
        peer:
        - access_list: DHCP-Server
          ipv6: true
    state: overridden

# Commands Fired:
# ---------------
# "commands": [
#       "no ntp authenticate",
#       "no ntp panic update",
#       "no ntp source GigabitEthernet0/1",
#       "ntp access-group ipv6 peer DHCP-Server",
#       "no ntp authentication-key 2 md5 00371C0B01680E051A33497E080A16001D1908 7",
#       "ntp peer ipv6 ipv6DomainNew.com",
#       "ntp peer 172.16.1.100 prefer",
#       "no ntp peer 172.16.1.10 version 2",
#       "no ntp peer ip checkPeerDomainIpv4.com prefer",
#       "no ntp server 172.16.1.12 version 2",
#       "no ntp server ipv6 checkServerDomainIpv6.com",
#       "no ntp trusted-key 21",
#       "no ntp trusted-key 3 - 4"
#     ],

# After state:
# ------------

# router-ios#show running-config | section ^ntp
# ntp access-group ipv6 peer DHCP-Server
# ntp peer ipv6 ipv6DomainNew.com
# ntp peer 172.16.1.100 prefer

# Using state: replaced

# Before state:
# -------------

# router-ios#show running-config | section ^ntp
# ntp access-group ipv6 peer DHCP-Server
# ntp peer ipv6 ipv6DomainNew.com
# ntp peer 172.16.1.100 prefer

# Replaced play:
# --------------

- name: Replace commands with provided configuration
  cisco.ios.ios_ntp_global:
    config:
      broadcast_delay: 22
      clock_period: 5
      logging: true
      master:
        stratum: 4
      max_associations: 34
      max_distance: 3
      min_distance: 10
      orphan: 4
    state: replaced

# Commands Fired:
# ---------------

# "commands": [
#        "ntp broadcastdelay 22",
#        "ntp clock-period 5",
#        "ntp logging",
#        "ntp master 4",
#        "ntp max-associations 34",
#        "ntp maxdistance 3",
#        "ntp mindistance 10",
#        "ntp orphan 4",
#        "no ntp access-group ipv6 peer DHCP-Server",
#        "no ntp peer 172.16.1.100 prefer",
#        "no ntp peer ipv6 ipv6DomainNew.com"
#     ],

# After state:
# ------------

# router-ios#show running-config | section ^ntp
# ntp max-associations 34
# ntp logging
# ntp orphan 4
# ntp mindistance 10
# ntp maxdistance 3
# ntp broadcastdelay 22
# ntp master 4

# Using state: gathered

# Before state:
# -------------

#router-ios#show running-config | section ^ntp
# ntp max-associations 34
# ntp logging
# ntp allow mode control 4
# ntp panic update
# ntp authentication-key 2 md5 0635002C497D0C1A1005173B0D17393C2B3A37 7
# ntp authenticate
# ntp trusted-key 3 - 3
# ntp trusted-key 21
# ntp orphan 4
# ntp mindistance 10
# ntp maxdistance 3
# ntp broadcastdelay 22
# ntp source GigabitEthernet0/1
# ntp access-group peer 2 kod
# ntp access-group ipv6 peer preauth_ipv6_acl kod
# ntp master 4
# ntp update-calendar
# ntp peer 172.16.1.10 version 2
# ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2
# ntp server 172.16.1.12 version 2
# ntp server 172.16.1.13 source GigabitEthernet0/1
# ntp peer ip checkPeerDomainIpv4.com prefer
# ntp peer ipv6 checkPeerDomainIpv6.com
# ntp peer ipv6 testPeerDomainIpv6.com prefer
# ntp server ipv6 checkServerDomainIpv6.com

# Gathered play:
# --------------

- name: Gather listed ntp config
  cisco.ios.ios_ntp_global:
    state: gathered

# Module Execution Result:
# ------------------------

# "gathered": {
#   "access_group": {
#       "peer": [
#           {
#               "access_list": "2",
#               "kod": true
#           },
#           {
#               "access_list": "preauth_ipv6_acl",
#               "ipv6": true,
#               "kod": true
#           }
#       ]
#   },
#   "allow": {
#       "control": {
#           "rate_limit": 4
#       }
#   },
#   "authenticate": true,
#   "authentication_keys": [
#       {
#           "algorithm": "md5",
#           "encryption": 7,
#           "id": 2,
#           "key": "0635002C497D0C1A1005173B0D17393C2B3A37"
#       }
#   ],
#   "broadcast_delay": 22,
#   "logging": true,
#   "master": {
#       "stratum": 4
#   },
#   "max_associations": 34,
#   "max_distance": 3,
#   "min_distance": 10,
#   "orphan": 4,
#   "panic_update": true,
#   "peers": [
#       {
#           "peer": "172.16.1.10",
#           "version": 2
#       },
#       {
#           "key": 2,
#           "minpoll": 5,
#           "peer": "172.16.1.11",
#           "prefer": true,
#           "version": 2
#       },
#       {
#           "peer": "checkPeerDomainIpv4.com",
#           "prefer": true,
#           "use_ipv4": true
#       },
#       {
#           "peer": "checkPeerDomainIpv6.com",
#           "use_ipv6": true
#       },
#       {
#           "peer": "testPeerDomainIpv6.com",
#           "prefer": true,
#           "use_ipv6": true
#       }
#   ],
#   "servers": [
#       {
#           "server": "172.16.1.12",
#           "version": 2
#       },
#       {
#           "server": "172.16.1.13",
#           "source": "GigabitEthernet0/1"
#       },
#       {
#           "server": "checkServerDomainIpv6.com",
#           "use_ipv6": true
#       }
#   ],
#   "source": "GigabitEthernet0/1",
#   "trusted_keys": [
#       {
#           "range_start": 21
#       },
#       {
#           "range_end": 3,
#           "range_start": 3
#       }
#   ],
#   "update_calendar": true
# },

# After state:
# -------------

# router-ios#show running-config | section ^ntp
# ntp max-associations 34
# ntp logging
# ntp allow mode control 4
# ntp panic update
# ntp authentication-key 2 md5 0635002C497D0C1A1005173B0D17393C2B3A37 7
# ntp authenticate
# ntp trusted-key 3 - 3
# ntp trusted-key 21
# ntp orphan 4
# ntp mindistance 10
# ntp maxdistance 3
# ntp broadcastdelay 22
# ntp source GigabitEthernet0/1
# ntp access-group peer 2 kod
# ntp access-group ipv6 peer preauth_ipv6_acl kod
# ntp master 4
# ntp update-calendar
# ntp peer 172.16.1.10 version 2
# ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2
# ntp server 172.16.1.12 version 2
# ntp server 172.16.1.13 source GigabitEthernet0/1
# ntp peer ip checkPeerDomainIpv4.com prefer
# ntp peer ipv6 checkPeerDomainIpv6.com
# ntp peer ipv6 testPeerDomainIpv6.com prefer
# ntp server ipv6 checkServerDomainIpv6.com

# Using state: rendered

# Rendered play:
# --------------

- name: Render the commands for provided configuration
  cisco.ios.ios_ntp_global:
    config:
      access_group:
        peer:
          - access_list: DHCP-Server
            ipv4: true
            kod: true
          - access_list: preauth_ipv6_acl
            ipv6: true
            kod: true
          - access_list: '2'
            kod: true
        query_only:
          - access_list: '10'
      allow:
        control:
          rate_limit: 4
        private: true
      authenticate: true
      authentication_keys:
        - algorithm: md5
          encryption: 22
          id: 2
          key: SomeSecurePassword
      broadcast_delay: 22
      clock_period: 5
      logging: true
      master:
        stratum: 4
      max_associations: 34
      max_distance: 3
      min_distance: 10
      orphan: 4
      panic_update: true
      peers:
        - peer: 172.16.1.10
          version: 2
        - key: 2
          minpoll: 5
          peer: 172.16.1.11
          prefer: true
          version: 2
        - peer: checkPeerDomainIpv4.com
          prefer: true
          use_ipv4: true
        - peer: checkPeerDomainIpv6.com
          use_ipv6: true
        - peer: testPeerDomainIpv6.com
          prefer: true
          use_ipv6: true
      servers:
        - server: 172.16.1.12
          version: 2
        - server: checkServerDomainIpv6.com
          use_ipv6: true
        - server: 172.16.1.13
          source: GigabitEthernet0/1
      source: GigabitEthernet0/1
      trusted_keys:
        - range_end: 3
          range_start: 10
        - range_start: 21
      update_calendar: True
    state: rendered

# Module Execution Result:
# ------------------------

# "rendered": [
#       "ntp allow mode control 4",
#       "ntp allow mode private",
#       "ntp authenticate",
#       "ntp broadcastdelay 22",
#       "ntp clock-period 5",
#       "ntp logging",
#       "ntp master 4",
#       "ntp max-associations 34",
#       "ntp maxdistance 3",
#       "ntp mindistance 10",
#       "ntp orphan 4",
#       "ntp panic update",
#       "ntp source GigabitEthernet0/1",
#       "ntp update-calendar",
#       "ntp access-group ipv4 peer DHCP-Server kod",
#       "ntp access-group ipv6 peer preauth_ipv6_acl kod",
#       "ntp access-group peer 2 kod",
#       "ntp access-group query-only 10",
#       "ntp authentication-key 2 md5 SomeSecurePassword 22",
#       "ntp peer 172.16.1.10 version 2",
#       "ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2",
#       "ntp peer ip checkPeerDomainIpv4.com prefer",
#       "ntp peer ipv6 checkPeerDomainIpv6.com",
#       "ntp peer ipv6 testPeerDomainIpv6.com prefer",
#       "ntp server 172.16.1.12 version 2",
#       "ntp server ipv6 checkServerDomainIpv6.com",
#       "ntp server 172.16.1.13 source GigabitEthernet0/1",
#       "ntp trusted-key 3 - 3",
#       "ntp trusted-key 21"
#     ]

# Using state: parsed

# File: parsed.cfg
# ----------------

# ntp allow mode control 4
# ntp allow mode private
# ntp authenticate
# ntp broadcastdelay 22
# ntp clock-period 5
# ntp logging
# ntp master 4
# ntp max-associations 34
# ntp maxdistance 3
# ntp mindistance 10
# ntp orphan 4
# ntp panic update
# ntp source GigabitEthernet0/1
# ntp update-calendar
# ntp access-group ipv4 peer DHCP-Server kod
# ntp access-group ipv6 peer preauth_ipv6_acl kod
# ntp access-group peer 2 kod
# ntp access-group query-only 10
# ntp authentication-key 2 md5 SomeSecurePassword 22
# ntp peer 172.16.1.10 version 2
# ntp peer 172.16.1.11 key 2 minpoll 5 prefer version 2
# ntp peer ip checkPeerDomainIpv4.com prefer
# ntp peer ipv6 checkPeerDomainIpv6.com
# ntp peer ipv6 testPeerDomainIpv6.com prefer
# ntp server 172.16.1.12 version 2
# ntp server ipv6 checkServerDomainIpv6.com
# ntp server 172.16.1.13 source GigabitEthernet0/1
# ntp trusted-key 3 - 13
# ntp trusted-key 21

# Parsed play:
# ------------

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ntp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------

# "parsed": {
#     "access_group": {
#         "peer": [
#             {
#                 "access_list": "2",
#                 "kod": true
#             },
#             {
#                 "access_list": "DHCP-Server",
#                 "ipv4": true,
#                 "kod": true
#             },
#             {
#                 "access_list": "preauth_ipv6_acl",
#                 "ipv6": true,
#                 "kod": true
#             }
#         ],
#         "query_only": [
#             {
#                 "access_list": "10"
#             }
#         ]
#     },
#     "allow": {
#         "control": {
#             "rate_limit": 4
#         },
#         "private": true
#     },
#     "authenticate": true,
#     "authentication_keys": [
#         {
#             "algorithm": "md5",
#             "encryption": 22,
#             "id": 2,
#             "key": "SomeSecurePassword"
#         }
#     ],
#     "broadcast_delay": 22,
#     "clock_period": 5,
#     "logging": true,
#     "master": {
#         "stratum": 4
#     },
#     "max_associations": 34,
#     "max_distance": 3,
#     "min_distance": 10,
#     "orphan": 4,
#     "panic_update": true,
#     "peers": [
#         {
#             "peer": "172.16.1.10",
#             "version": 2
#         },
#         {
#             "peer": "checkPeerDomainIpv6.com",
#             "use_ipv6": true
#         }
#     ],
#     "servers": [
#         {
#             "server": "172.16.1.12",
#             "version": 2
#         },
#         {
#             "server": "172.16.1.13",
#             "source": "GigabitEthernet0/1"
#         },
#         {
#             "server": "checkServerDomainIpv6.com",
#             "use_ipv6": true
#         }
#     ],
#     "source": "GigabitEthernet0/1",
#     "trusted_keys": [
#         {
#             "range_start": 21
#         },
#         {
#             "range_end": 13,
#             "range_start": 3
#         }
#     ],
#     "update_calendar": true
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list / elements=string
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
['ntp peer 20.18.11.3 key 6 minpoll 15 prefer version 2', 'ntp access-group ipv4 peer DHCP-Server kod', 'ntp trusted-key 9 - 96', 'ntp master stratum 2', 'ntp orphan 4', 'ntp panic update']
gathered
list / elements=string
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list / elements=string
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list / elements=string
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['ntp master stratum 2', 'ntp server ip testserver.com prefer', 'ntp authentication-key 2 md5 testpass 22', 'ntp allow mode control 4', 'ntp max-associations 34', 'ntp broadcastdelay 22']


Authors

  • Sagar Paul (@KB-perByte)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/ios/ios_ntp_global_module.html